Sometimes, it is a big question of how to turn off maintenance light on Toyota Tacoma. These lights are annoying and create discomfort for the drivers. But have you ever wondered these lights are most useful for you?

They can tell you if your vehicle requires any maintenance or not. These lights include all the necessary fields that help in the smooth running of your vehicle.

You are watching: Turn off maintenance light toyota tacoma

From engine to oil, these lights indicate that it is time to maintain important parts of your vehicle.

This blog will discuss the maintenance lights and their functionalities and how to turn off maintenance lights on Toyota Tacoma.


Contents present
1 What is a Maintenance Light?
2 How Does Maintenance Light Work?
3 Guideline of How to Turn off Maintenance Light on Toyota Tacoma
3.1 Material Required for How to Turn Off Maintenance Light On Toyota Tacoma
3.2 Approximate Cost of the Service/Setup for How to Turn Off Maintenance Light On Toyota Tacoma
4 How To Reset Maintenance Light on Toyota Tacoma
4.1 Step by Step Work Guide for How to Turn off Maintenance Light on Toyota Tacoma
4.1.1 01. Turning on the Toyota Tacoma
4.1.2 02. Turn off the car and press the reset button of the trio meter
4.1.3 03. Turn off your car’s engine and press the reset button of the trio meter
4.1.4 04. Pressing the reset button
4.1.5 05. Release the reset switch
4.2 What are the Benefits of Maintenance Light?
4.3 What Could Cause the Maintenance Light to Come on?
5 FAQ’S About Maintenance Light & How To Turn Off Maintenance Light On Toyota Tacoma
5.1 1. What does it mean when the maintenance light comes on?
5.2 2. What to do when the maintenance light turns on in your vehicle?
5.3 3. What does an exclamation mark mean in Toyota?
5.4 4. What are slip indicators in Toyota Tacoma?
5.5 05. How long does it take for the check engine light to come back on after reset?
6 Common Problems & Solutions About MAINT REQD On Toyota Tacoma
6.1 Tips for Maintaining Toyota Tacoma
6.1.1 01. Scheduled car maintain
6.1.2 02. Engine oil and filters
6.1.3 03. Battery and other equipment
6.1.4 04. Wheels and outer parts
7 Verdicns

What is a Maintenance Light?

The light present at the dashboard showing different maintenance required by the vehicle is called maintenance light.

The maintenance light is required for giving a reminder to the driver about the requirement of the maintenance.

You may have noticed when you start the engine of your vehicle, the speedometer of your vehicle displays some lighted symbols.

These symbols signify you to check the engine light, coolant emergency light, traction control, low engine oil light, maintenance requirement light, etc.

These all symbols provide a hint to the drivers or the owners to work on them and enhance the endurance of their vehicle.

Find the best cold air intakes for your Tacoma & Tundra here

How Does Maintenance Light Work?

The maintenance light notifies you about your vehicle’s maintenance schedule according to the distance driven by it.

The light illuminates for around 3 seconds and then flashes for the next 15 seconds every 4,500 miles after it is reset.

The maintenance light reminds you that soon your car will require a service to drive without any worries. Most of the time, it indicates an oil change in your car.

Check your Toyota engine problems that are usually troubling the performance.

Find floor mats that keep your Toyota sienna clean and tidy here

Guideline of How to Turn off Maintenance Light on Toyota Tacoma

The maintenance light of the Toyota Tacoma does not go away on its own.

Hence, it would be better to turn it off so that the dashboard will have less distraction.

These lights are sometimes very annoying when driving in a crowded area as the beep sound made by these lights can distract you from driving.

In the same way, if someone in your family does not know the meaning of maintenance light, then probably that person might think that the car is damaged or something.Secondly, resetting is also required after the oil changes restart to counter.

When you drive for more than 5,000 miles, the light will automatically indicate that it is time for a new oil change, so you have to keep a manual track of the miles.

Material Required for How to Turn Off Maintenance Light On Toyota Tacoma

When you turn off the maintenance light, ensure that the odometer displays the total mileage, especially the A display. If your Toyota Tacoma is on, then turn it off.

When the vehicle is turned off, push and hold the ODO reset button. It would be best if you continued to hold the ODO button and turn the ignition key to keep the dash lights on.

At that time, the vehicle should remain in the off position. The ODO display button will flash for some time until it shows all zeros.

Once the ODO turns zero, you can release the button, and you can again switch the key to the off position. At last, the maintenance lights will finally turn off.

Choose the best battery for Toyota Tacoma here.

Approximate Cost of the Service/Setup for How to Turn Off Maintenance Light On Toyota Tacoma

If we consider the maintenance costs, drivers, on average, spend close to around $500 every year on their Toyota Tacoma. This depends on the low end compared to various brands.

The service is free during the first two years. Some exclusive policies for vehicles have made them very affordable for drivers.

The servicing for these cars is pocket-friendly for them. It is cheaper if compared with other brands of cars.

On average, you can consider it from $1,000 to $2,000. It adds coverage to your car and a vehicle warranty which includes the repair cost and saves your monthly budget.

How To Reset Maintenance Light on Toyota Tacoma

Learning how to reset your Toyota Tacoma’s maintenance lights can actually avoid trips to an automobile shop for the sake of just reset.

People generally ask how to turn off the maintenance light on Toyota Tacoma; here’s what you have to do.

It is very beneficial for the users to learn how to reset the maintenance required light to avoid the traps of the service center or shop.

The following are a few tips on how you can do it manually.

Learn about the best bull bars for your Tacoma here.

Step by Step Work Guide for How to Turn off Maintenance Light on Toyota Tacoma

01. Turning on the Toyota Tacoma

The car should be turned on so that you can look at the position on the dashboard. The odometer at that time must display miles and should not show miles.

02. Turn off the car and press the reset button of the trio meter

As you have turned off the key back, make sure that the trip meter reset button is pressed. Press that button for some seconds.

03. Turn off your car’s engine and press the reset button of the trio meter

Keep pressing the reset button and gently press the on button. Before turning on the engines, make sure it is in the turned-on position. Keep a close eye on the odometer.

04. Pressing the reset button

Keep a close track of the odometer and keep the trip meter pressed at the same point. The odometer will start displaying the series on the dashboard.

In a few seconds, it will start showing zero. Keep the button pressed until the odometer reading returns start showing on the screen.

05. Release the reset button

The last step left is releasing the reset button. The task is done.

Want to know about the best cv axles for your vehicle? Here is the full review.

What are the Benefits of Maintenance Light?

The maintenance light will appear as “MAINT REQD” on the dashboard of your Toyota Tacoma.

This light will appear permanently to help you know that your car needs an oil change.

Changing the oil in your Toyota Tacoma regularly increases the efficiency of the fuel to make your car run as smooth as butter.

The light gets turned on as an indication signal every 5,000 miles, which works as a reminder to your car for an oil change.

As a Toyota Tacoma owner, you need to know that if the lights are turned on and driving, it does not mean that the car is damaged.

The light completely relies on the odometer counting those 5,000 miles, which detects the requirement of an oil change.

It can annoy you sometimes if you have already changed the oil and still reminding you to change it.

These lights can be reset manually by you if in case the technician forgets to reset them.

What Could Cause the Maintenance Light to Come on?

The maintenance light on the dashboard of your vehicle can indicate several important issues in your vehicle.

If the engine is facing issues and some work is needed to be done on that, then the engine light will come on.

Other than this, when the coolant, traction controller, and oil pump are not working properly, the maintenance light comes on.

This is a good sign as you cannot manually check the engine or other internal parts of the vehicle thoroughly.

So these indicative lights give you a signal when your vehicle requires any such technical support. Apart from internal functionalities, the maintenance lights also give safety signals.

You might have noticed when you do not wear a seat belt, your dashboard shows indication. Also, when you forget to pull off the hand brake, there is a notification for that.

See more: How To Balance Na H2O Naoh H2 O To Naoh + H2 Class 11 Chemistry Cbse

You might have noticed there is a signal for open doors also. So these maintenance lights are helpful for drivers to detect a fault if there is any automatically.